86-532-88732781

admin@tennry.com

CN
  • Graphite Product
  • Graphite Electrode
  • Special type graphite
  • Carburant
  • Products

    Graphite Electrode

  • Products
    Detail

  • Physical And
    Chemical Index

  • Packing

  • Related
    roducts

  • Inquiry
    Now

  • Artificial graphite electrode is made of high-quality low ash materials, such as petroleum coke, needle coke and coal pitch.after calcining,burdening,kneading,forming,baking and pressure impregnation, graphitization and then precision machined with professional CNC machining.such of the products own characteristics with low resistivity, good electrical conductivity ,low ash, compact structure,good anti oxidation and high mechanical strength, so it is the best conductive material for electric arc furnace and smelting furnace.


    Notes of the use of graphite electrode 

    1.The electrode holder should be held in the place beyond the security line of the top electrode;otherwise, the electrode would be easily broken.the contact surface between the holder and the electrode should be cleaned up regularly to maintain a good contacting,the cooling jacket of the holder shall be avoided from water leakage. 
    2.Identify the reasons it there is gap in the electrode junction,do not use them until the gap is eliminated. 
    3.If there is falling off of nipple bolt when connecting electrodes,it is necessary to complete the nipple bolt. 
    4.The application of electrode should avoid of tilting operation, particularly , the gr.oup of connected electrodes should not be put horizontally so as to prevent from breaking. 
    5.When charging materials to the furnace,the bulk materials should be charged to the place of the furnace bottom,so as to minimize the impact of the large furnace materials on the electrodes. 
    6.The large pieces of insulation materials should be avoided of stacking on the bottom of the electrodes when smelting .so as to prevent from affecting the electrode use,or even broken. 
    7.Avoid of collapsing the furnace lid when rising or dropping the electrodes,which may result in electrode damage. 
    8.It is necessary to prevent the steel slag from splashing to the threads of the electrodes or nipple stored in the smelting site,which may damage the precision of the threads. 

    Properties
    Unit
    UHP
    HP
    RP

    300-600

    mm

    650-800

    mm

    300-800

    mm

    300-800

    mm

    Electric resistivity
    Electrode
    μΩm
    4.8-5.8
    4.6-5.8
    5.8-6.6
    7.8-8.8
    Nipple
    3.8-4.5
    3.8-4.5
    4.2-5.0
    5.0-6.5
    Flexural strength
    Electrode
    Mpa
    10.0-14.0
    10.0-14.0
    10.0-13.0
    7.0-12.0
    Nipple
    20.0-26.0
    22.0-26.0
    18.0-22.0
    15.0-20.0
    Young's modulus
    Electrode
    Gpa
    9.0-13.0
    10.0-14.0
    8.0-12.0
    7.0-9.3
    Nipple
    15.0-18.0
    15.0-18.0
    14.0-16.0
    12.0-14.0
    Bulk density
    Electrode
    ≥g/cm3
    1.68-1.74
    1.70-1.74
    1.62-1.66
    1.53-1.56
    Nipple
    1.77-1.82
    1.78-1.84
    1.74-1.80
    1.70-1.74
    CTE(100-600℃)
    Electrode
    x10-6/℃
    1.1-1.4
    1.1-1.4
    1.6-1.9
    2.2-2.6
    Nipple
    0.9-1.2
    0.9-1.2
    1.1-1.4
    2.0-2.5
    Ash
    0.3
    0.3
    0.3
    0.5


    Packaging:

    1. Standard export carton/plywood crate
    2. Customized shipping mark
    3. QC Department Will Check In Case The Packing Method Isn't Safe Enough.

    Shipping:

    1.By courier,like DHL,UPS,FEDEX,etc.It is door to door,usually,3-4 days to arrive.
    2.By air to the air port,usually,5-7 days to arrive.
    3.By sea to sea port,usually,15-30 days to arrive.


    Inquiry Now

    If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

  • About

  • Products

  • CONTACT

    Qingdao Tennry Carbon Co.,Ltd

    Tel: 86-532-88732781

    Fax: 86-532-88732787

    E-mail: admin@tennry.com

    Web: www.tennry.com

    Add:506 room,5th floor,Shengwen, No.928 Heilongjiang Middle Road, Chengyang District,Qingdao City, Shandong Province, China